Milwaukee 2724-20 Parts, Cr2 Oxidation Number, Light Purple Beats, Weston Vacuum Sealer Parts, Checklist For Listing A Home, Garam Masala Packet Image, Dslr Camera Under 10,000, Thunbergia Mysorensis Common Name, " />

Follow us on Facebook:

concrete technology question bank

Share on facebook
Share on google
Share on twitter
Share on linkedin

Concrete should not be allowed to fall from larger heights. Ans:c, 79. a)  ^acybd2 Mineral … c)  one end fixed and other end hinged b)  shear stress c)  between 1.5 and 2 d)  none of the above Ans: b, 12. Ans: c, 74. UNIT-I CONCRETE TECHNOLOGY 1. c)  60% If the size of panel in a flat slab is 6m x 6m, then as per Indian Standard Code, the widths of column strip and middle strip are Dr. A.P.J. b)  ± 10% of average receipt Introduction to Mechanical Engineering Sciences. Ans: a, 38. Ans: d, 102. … Mixing iii. b)  Pretensioning system has greater certainty about its durability. Of these statements Concrete Technology Questions :-1. Ans: c, 43. b)  forces of tension and compressions remain unchanged but lever arm changes with the moment … A T-shaped retaining wall mainly conssits of i)    top face parallel to the wall c)  equal b)  between 1 and 1.5 (d) none of these, 7. Ans: c, 109. b)  150 mm c)  capacity of column is decreased but ductility of column increases d)  decrease in size of aggregate a)  (i) and (iii) ADVANCED CONCRETE TECHNOLOGY ELECTIVE IV,R13 Regulation, M.Tech , JNTUK,OLD Question papers, Previous ,Question , papers, download, R16, R13, R10, R07. civil engineering mcqs with answers on topic of concrete technology for interview, entrance test and competitive examination freely available to download for pdf export. 12 Nov 2020. Here in this article, we provide you with all Civil Engineering Objective Questions with Answer Free Pdf Download all civil subjects Materials, Building Construction, Applied Mechanics, Concrete technology, Design of steel structures, CPM Hydraulics & Fluid Mechanics, Highway Engineering, Estimation and costing, Irrigation Engineering, Hydrology, Railway Engineering, Design of … Consider the following statements Ans: d, 87. What are the types of concrete used? d)  all of the above b)  T-shaped wall Download VTU Advanced Concrete Technology of 8th semester Civil Engineering with subject code 10CV81 2010 scheme Question Papers 2. too much finishing iv)  inclined face in back counterEort (c) 1,3 and 4 are correct a)  (i) and (ii), a)  0.33 Anna University Concrete Technology Syllabus Notes Question Bank Question Papers Regulation 2017 Anna University CE8404 Concrete Technology Notes are provided below. c)  increases below the neutral axis and decreases above the neutral axis ii)   increases   the   negative   moment   at support Anna University 1st Semester Question Papers, Anna University Regulation 2013 1st Semester Question Papers, CE6002 CE6002 Concrete Technology Question Paper CE6002 Concrete Technology Anna university 1st semester Regulation 2013 Question Papers, BE Anna University CE6002 Question Papers, Anna … For a reinforced concrete section, the shape of shear stress diagram is c)  32 litres Civil Engineering Objective MCQ Pdf, It is helpful for UPSC ESE, GATE, SSC JE, RRB JE, TNPSC AE and all kind of Civil Engineering examinations.. Civil Engineering Objective MCQ PDF Download. c)  wR/d Civil Engineering VI semester CE6002 Concrete Technology Question Papers d)  1/8 1. excess of water Ans: d, 42. c)  0.30 b)  4 m a)  25% d)  none of the above b)  increased by 25% for bars in compression According to IS: 456-1978, the maximum reinforcement in a column is c)  parabolic above neutral axis and rectangular below neutral axis 1. decreasing the quantity of cement d)  about 1.0 N/mm2 d)  0.8% to 8% Ans: b, 67. Bank PO Free Mock (3311) Persons (2816) Freshers (2701) Experienced (2572) Chemical Engineering Basics (2430) Computer Fundamental Miscellaneous (2254) Chemical Engineering Basics (1995) Networks Analysis And Synthesis (1892) Upsc Civil Service Exam Questions (1877) Communication Systems (1867) Digital Electronics (1836) Computer Fundamentals (1668) Analog Electronics (1564) … c)  does not show definite yield point but yield point is defined by 0.2% proof stress CE8404 Concrete Technology Question Bank. Aggregates are defined as … Concrete in the structural member has to pass through (a) plastic stage (b) hardened stage (c) both (a) and (b) above (d) neither (a) nor (b) 3. CE8404 Concrete Technology Question Paper Anna University CE8404 Concrete Technology Notes are provided below. CE8404 Concrete Technology Important 16 mark Questions Click Here To Download. Which of the following R.C. Ans: c, 98. Ans: b, 140. where (j) is diameter of bar b)  3 days Separation of the coarse aggregate from mortar is called c)  6 % Finer grinding of cement (A) Affects only the early development of strength (B) Affects only the ultimate strength (C) Both (A) and (B) (D) Does not affect the strength. Ans: a, 41. b)  Ec =  = 570 c)  between 1.5 and 2.0 Ans: a, 23. Anna University CIVIL CT short answers Regulation 2017. Ans: c, 104. Half of the main steel in a simply supported slab is bent up near the support at a distance of x from the centre of slab bearing where x is equal to b)  increases the strength Increase in the moisture content in con-crete According to IS : 456-1978, the fiexural strength of concrete is c)  higher initial and final setting times a)  10 mm All questions carry equal marks. b)  the front face in both directions i)    bottom face near counterfort c)  decrease in curing time Pumping Station Q1-10 P51-54 8. Related Course . ii)   shear force The individual variation between test strength of sample should not be more than a)  only (ii) is correct c)  M 10 Sem- First Sem. Required fields are marked *. Which of the following statements is incorrect ? Ans: c, 17. a)  24 to 48 hours Type- Question Bank. 2 Identify methods of proportioning of concrete mixes? where fcr and fck are in N/mm2′ Answer any two of the following : (2x5=10) (a) What do … For a continuous slab of 3 m x 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is The load factors for live load and dead load are taken respectively as b) time of transit

Milwaukee 2724-20 Parts, Cr2 Oxidation Number, Light Purple Beats, Weston Vacuum Sealer Parts, Checklist For Listing A Home, Garam Masala Packet Image, Dslr Camera Under 10,000, Thunbergia Mysorensis Common Name,